[Alguhan]

Caut kit-urile firmei plusmodel. Daca ati auzit sau ati vazut undeva?

[Tomcat]

Da ce, te-ai saturat deja de Italeri(nu Italieri cum spun multi) si de Revell.Din ce am lucrat pana acum cele Revell mi se par cele mai reusite.Spune-mi si mie daca sunt mai bune(calitatea plasticului si mai important, detalile) decat cele precizate mai sus.Poate incerc sa fac si eu unul

[Big]

Ma mai bag si io ca unul care a mai cioplit machete statice, si care mai are inca vreo 20 de kit-uri neexecutate prin casa...
Din produsele pentru toata lumea Italeri sunt cei mai buni. De cand mai stiu eu nu am vazut nici un rateu la ei! si nici rahat vandut in cutie frumoasa. La revel am mai vazut... daca nu credeti va arat dovezile, ca le mai am inca pe acasa.

plusmodell face serie mica, si lucreaza cu complexe gen rasini, foto etch uri si plastic... nu stiu sigur dar parca dom doctor aducea ceva de genul asta...

big

[Pletila]

De accord cu Big-ul.Italeri nu am vazut cu rateuri... poate alea Dragon da nu sint sigur ca am prea multe in comun cele doua desi pe gataloage asa scrie: Italeri dragon.
La revel am vazut si eu da am improvizat.

Cele mai nasoale cred ca am avut de la Heller. :huh:

[Big]

Dragon este brand separat. dar italeri il distribuie prin reteaua proprie. de ce? habar n'am!

Mai nasol ca heller este A modell parca de la ucrainieni! io m-am fript cu un SU 26M care arata a orice numai a kit de avion nu!

Big

[Pletila]

Am curatat la bavuri de pe un Bf-u Heller de mi-au sarit capacele.Mai bine il sculptam din lemn ca iesea mai bine. :huh:

[VIPER]

Pai sa vedem:
- am luat un Italeri, un Harrier: in cutie am avut 2 jumatati pe dreapta.... Stanga pauza...
- Dragon = China, cu toate astea sunt tare faine si cuminti la pret!!!
- Revell? Hmmm... cam scumpe pentru calitatea lor...
Le mai tineti minte pe alea RDG-iste? Alea erau faine rau!

[VIPER]

A, dar de machetele statice facute de Tamiya ce ziceti? Sa vedeti acolo calitate!!!

[Pletila]

Nasoala faza aia cu 2 jumatati de dreapta :huh: :D :huh: :D .
Eu unu nu am patit-o, da nu e timpu trecut.
Pa alea RDG-iste nu la stiu,probabil nu le-am apucat ,cum se zice. :D

[Pletila]

Tamiya nu am lucrat nici o data.
:huh:

[VIPER]

Nici eu, dar inca visez... Uite, o sa va dau niste exemple...

[Pletila]

Ascult...

[VIPER]

http://www.tamiya.com/english/products/14092rc211v/top.jpg
http://www.tamiya.com/english/products/14092rc211v/engine.jpg
http://www.tamiya.com/english/products/14092rc211v/frame.jpg

1/12 scale model, Overall length: 172mm, Overall width: 56mm. The two-stroke, V5 engine has been replicated to perfection. Every characteristic of the actual Honda RC211V such as the fuel tank placed under a protective cowling and the innovative exhaust pipe layout has been accurately replicated. Engine and suspension assembly on frame imitates that of the actual motorcycle. Upper and seat cowling, and duct cover areas can be affixed/or detached via tiny, precision-made screws even after completion. Frame and swing arms are reproduced with high quality metal plated parts. Decals for Valentino Rossi's number 46 motorcycle and Tohru Ukawa's number 11 machine are included.

Aceasta postare a fost editata de VIPER: 15 May 2003 - 04:18 PM

[VIPER]

http://www.tamiya.com/english/products/35263humvee/humvee_top1.jpg

1/35 Scale Overall length: 137mm The unique form of the Humvee has been accurately reproduced. You can choose between 2 types of bonnet vents. Front guard has also been replicated down to the finest detail. Tires are made out of rubber. Mk.19 Grenade launcher, M2 machine gun, ammunition boxes as well as two figures are part of the kit. Includes decals for 4 different markings.

[VIPER]

Mai bag? :huh:

[Pletila]

BAAAIIIIII aia e motocicleta sau macheta?!!!!!! Arata super!!!!!!1


DACA MAI AI MAI BAGA SA MAI CLATIM OCHIU'

[VIPER]

http://www.tamiya.com/english/products/56012kubelwagen/kubelwagen.jpg

Asta e cu radiocomanda!!!

This RC assembly kit is based on the Kubelwagen Type 82, which was used extensively during WWII. Overall length: 247mm, overall width 101mm, overall height: 95mm. Weight fully equipped: 380g. Linear construction and reliable suspension system. Comes with one driver figure. Rear mounted motor powers rear wheels and front mounted motor powers steering. Equipped with king-pin suspension system on front. Batteries can be easily removed from chassis undersurface. Two motors used for control of car. Kit comes with two channel transmitter. Realistic rubber like tires with authentic tread pattern. Two FA-130 motors included.

[Big]

Hei Viperino, Tamya nu este chiar pentru toata lumea! si asta din cauza ca are un pretz, cam stratosferic...

Mai alea RDG erau chiar interesante! de exemplu la AN 2 unde nu au stiut exact ce si cum, au improvizat! si lucrau la scari atipice de ex. 1:100. si acum mai am pe acasa un Mercure, un tu 144... mama ce mai umblam dupa ele!

Dar de airfix ce ziceti?

bix

[Pletila]

Figurinele arata destul de bine da Hummer-ul e super adevarat!

[VIPER]

Airfix = OK! Si mai am si eu pe acasa RDG-iste, si inca rezista!!! Supercalitate!

tamiya = pret mare = normal! Dar merita!!! Ce, n-ati da pe un tanc RC de 1/16, cu senile metalice, facut IMPECABIL, cu modul de sunete preluat de la modelul 1/1,"modica" suma de 600$?

[VIPER]

Pletila, citeste si o sa ai surpriza sa vezi ca e..... MACHETA!!!

[Pletila]

Cam cit coasta un Tamya sau mai bine zis CONTAMINA ca m-am inbolnavit.

Am lucrat un airfix da nu m-a impresionat prea tare.

Pima dragoste nu se uita nici o data:Italeri :huh:

Prima macheta a mea a fost Italeri: Apache Longbow

[VIPER]

Honda costa, de ex, 29$ in US. Vi se pare mult? Sincer!!!

[Pletila]

Oricum nu pricep de ce trebuie sa aiba Kubelwagen-ul ,radiocomanda.Daca aveam asa ceva il puneam sub 2 acvarii si nu-l scoteam decat la sarbatori.

[Pletila]

29 de $ nu enici mult nici putin.Pentru un pasionat de statice : Face banu' nimic de zis!

[Pletila]

Mi-am adus aminte de RDG-iste!!!

Eram mic ,ma pa vremea aia ,da stiu ca am avut un elicoptrer MIL si un avion TU -120,care avea un bot asa ca de stiuca.
Mama ce misto erau!!! Sau asa mi se pareau mie ca mi le facea tata.

Nu erau alea care aveau lipici intr-un tub asa argintiu? Lipiciul era foarte vechi intotdeauna.

[VIPER]

Asa, de incheiere (pe ziua de azi...)

http://www.tamiya.com/english/products/20046mclaren/mclaren.jpg
http://www.tamiya.com/english/products/20046mclaren/mclaren2.jpg
http://www.tamiya.com/english/products/20046mclaren/mclaren3.jpg

This is the 1/20 scale assembly model kit based on the McLaren Mercedes MP4/13. Overall length: 227mm, overall width: 90mm. Model features markings honoring Hakkinen's and Coulthard's "One-Two Finish" at the German GP. Rear cowl is removable, permitting observation of the realistically recreated Mercedes Benz V10 engine, radiator and suspension even after completion of the model. Step-bottom and diffuser have also been authentically captured as they appear on the real car. In line with rule change in 1998, grooved Bridgestone tires made of solid rubber are also included. Coloring features flowing gradations with logo marks, authentically reproduced with decals. Two kinds of steering wheels are included in kit, permitting modeling of either Hakkinen's version or Coulthard's version.

[Pletila]

Eu unu sunt fan Ferrari da masina asta arata superb!

Oricum astia de la firma Tamya sunt super dementi de fac atitea detalii.Norocu alora de au bani sa dea pe ele. :huh:

[VIPER]

Ferrari zici? Iote Ferrari! Si e doar 28$ in US!!!

http://www.tamiya.com/english/products/20052f2001/f2001.jpg
http://www.tamiya.com/english/products/20052f2001/f2001_5.jpg
http://www.tamiya.com/english/products/20052f2001/f2001_4.jpg

Scale: 1/20, Total length: 223mm, total width: 90mm, total height: 55mm. Slanted nozzle and aerodynamic form of the actual Ferrari F2001 machine's body have been authentically recreated. Center monocoque frame has been molded as one piece for easy assembly. Nose cone has been reproduced with 2 pieces. Shape of suspension arm and push rod is accurately portrayed in this model. 90deg longitudinally mounted V10 engine depicted down to every last detail. Realism of cockpit enhanced with separately molded parts for seat belt. Model captures the intricacy of the F2001 machine's diffuser Fuel intake cover can be assembled in the opened or closed position. Fuel intake valves reproduced with metal transfer marks. Grooved tires come with logo pre-printed on sides. Heat resistant rear wing and rear suspension arm of the actual Ferrari F2001 are recreated in this kit with aluminum stickers. Decals provided for recreation of car numbers 1 and 2.

[Pletila]

Io vroiam de mult sa ma mut in US !

Probabil ca la noi asa ceva face cam 200 de $.